Table of Contents
Advertisement
The switch is near the left handgrip.
rmo2010-001-020_b
TYPICAL
1. Headlight switch
The switch is used to select high or low
beam for the headlight. The headlights
automatically turn on when the engine
reaches 800 RPM and turn off after ap-
proximately 20 seconds when engine
has been stopped.
To select high beams, push the switch
to the front position. To select low
beams, push the switch to the back
position.
To flash the high beams, press the
switch to the down position, then re-
lease it. The high beams will stay on as
long as you hold down the switch.
rmo2010-001-020_f
TYPICAL
1. High beams
2. Low beams
3. Flash high beams
7) Turn Signal Button
Left side
turn signal
Right side
turn signal
The turn signal button is located near
the left handgrip.
rmo2010-001-020_g
TYPICAL
1. Turn signal button
The turn signal button turns off auto-
matically after a normal turn, but you
may have to turn it off manually after a
shallow turn or lane change.
To turn the signal off, press the button
in.
Turn signals will automatically turn off
after 30 seconds while the vehicle is
moving.
8) Horn Button
The horn button is located near the left
handgrip.
_______________
SECONDARY CONTROLS
21
Advertisement
Table of Contents
