Jolly Mec I-DEA IDRO Installation, Use And Maintenance Manual page 45

F . 47
ig
F . 49
ig
F . 50
ig
F . 52
ig
F . 48
ig
F . 51
ig
F . 53
ig
11. Resetting the safety thermostat (see CHAP.08.4)
Loosen the red tap located under the side panel on the right.
(F . 47).
ig
Press the white button (F . 48), cusing a pointed instrument,
ig
until you hear the safety switch reset "CLICK".
Refit the black hood.
12. Connecting the power socket
Before connecting the plug on the cord supplied with the stove
to the domestic electrical system, plug it into the socket fitted
on the back of the right side panel (F
through the groove on the back of the stove, making sure the
switch is in the "O" position.
After inserting the plug into the power socket, press the switch
O – I on pos. "I" (F . 51).
ig
13. Loading the pellet hopper
Located on the rear part of the device, the hopper is filled
through an openable lid. The hopper must be filled with pellets
using a shovel (not supplied) (F
directly from the bag.
. 49-50) ) threading it
ig
. 52-53) and not poured in
ig
45