Table of Contents
Advertisement
F
.29
ig
F
.31
ig
F
.33
ig
F
.35
ig
F
.37
ig
F
. 38
ig
F
.30
ig
F
.32
ig
F
.34
ig
F
.36
ig
6.
Fume deflector cleaning and removal (weekly)
Clean the fume deflector at least once a week (F
opening the combustion chamber door, grasp the tab at the back
of the part and pull horizontally forward to free it from its rear
rests (F
. 30). Accompany deflector rotation until vertical (F
ig
31-32). Shake the part in this position and vacuum dust residue.
Furthermore, fully remove the deflector at least once every two
weeks to fully clean the upper part of the combustion chamber.
To remove, starting from the vertical position indicated for
cleaning, tilt the deflector back and, once at a 30° angle, lift
and push inward to unhook it from the front supports (F
Lower the deflector vertically and slightly rotate it to remove (F
34-35).
Use the brush supplied to remove any ash content from the
fume deflector seat and the flue deflector itself (F
Repeat the steps in reverse order to reassemble the deflector,
making sure it is correctly fitting on its supports in the horizontal
position.
7.
Stove body cleaning (1 - 3 days)
Remove the burn pot and deflector (as described in points 2.
Burn pot removal for cleaning and 6. Fume deflector cleaning
and removal), Use the supplied swap and brush to clean the
exchanger, letting dust drop into the tray (F
ash tray, empty it and accurately clean (as described in point 3.
Ash tray removal and cleaning).
. 29). After
ig
.
ig
. 33).
ig
.
ig
. 36-37).
ig
. 38). Remove the
ig
43
Advertisement
Table of Contents
