Jolly Mec I-DEA IDRO Installation, Use And Maintenance Manual page 20

Fume exhaust kit rear outlet
Fume connection pipe L300/L250mm Ø80mm:
Metallic pipe used to connect the generator to the flue.
Fume exhaust pipe Ø100mm:
Metallic pipe used to connect the generator to the flue.
Fume exhaust kit vertical outlet
Fume exhaust pipe Ø80mm:
Metallic pipe used to connect the generator to the flue
(the pipe serves the first outlet section of the device, to
be used as a flue union)
20
T union for fume exhaust with condensate drain cap:
To be installed at generator output. Ø80mm for union connection
and Ø100mm for flue connection.
Connection band:
Band to fasten the fume
exhaust pipe to the stove.