Chap.03 Handling And Transport; Receiving Goods; Lifting And Transport - Jolly Mec I-DEA IDRO Installation, Use And Maintenance Manual

Pellet fired stove with boiler
Table of Contents

Advertisement

CHAP.03 HANDLING AND TRANSPORT

03.1

RECEIVING GOODS

The machine is delivered on a pallet, packed in a wooden cage with a cellophane hood.
when receiving merchandise, check that:
all packaging is intact
all of the merchandise indicated on the delivery bill has actually been delivered
the supply corresponds to the order specifications;
if the packaging is damaged, check the condition of the contents as any breakages should be reported immediately to
the carrier and retailer.
check there is no damage to any supplied elements; if there is any breakage detected, report to the carrier and retailer
as soon as possible.
If any material listed on the bill of lading is missing, inform the retailer immediately.
WARNING
Danger of suffocation
Make sure that children do not come into contact with packaging materials, plastic film or polystyrene as this could cause
suffocation.
03.2

LIFTING AND TRANSPORT

Personnel in charge of handling the product must have read and thoroughly understood the safety prescriptions in CHAP.02 -
ACCIDENT PREVENTION / SAFETY REGULATIONS of this manual and must wear work gloves and safety footwear.
For safety reasons, unauthorised persons must not be in the area while the product is being moved.
The product must be moved only with a trolley or pallet fork, and never with belts, chains, overhead cranes (see CHAP.06 - TECHNICAL
DATA for the weight). All parts of the packaging coming into contact with the crane, belts or straps must be protected.
Unless there are obstacles, lift the product to a maximum of 30 cm from the ground and move it slowly, avoiding jerky or brusque
movements.
WARNING
Danger of crushing, collision and abrasions.
11

Advertisement

Table of Contents
loading

Table of Contents