Table of Contents
Advertisement
COUNTDOWN TIMER
ON/SETTING:
1.
Press and hold
AM
PM
displayed, and hour flashes.
2. To select hour press
ON
OFF
3. T
4. To select minutes press
ton.
5. T
OFF:
Press
time disapear.
NOTE:
At end of countdown time period, the fire turns off. The
CountdownTimer only works in Manual, Thermostatic, and
Eco Modes. Maximum countdown time is 9 hours and 50
minutes.
MODES OF OPERATION
Thermostatic Mode
AM
PM
The room temperature is measured and
compared to the set temperature. The
ON
OFF
justed to achieve the set temperature.
Program Mode
AM
PM
Programs 1 and 2, each can be
programmed to go on and off at specific
ON
OFF
times at a set temperature.
Eco Mode
Flame height modulates between high
AM
and low. If the room temperature is
lower than the set temperature, the
flame height stays on high for a longer
period of time. If the room temperature
is higher than the set temperature, the
flame height stays on low for a longer
period of time. One cycle lasts approxi-
mately 20 minutes.
Remote Control Operation
button until
or
button.
button. Minutes
or
but-
button or wait.
button,
and countdown
-
THERMOSTATIC MODE
ON:
Press
AM
PM
temperature displayed briefly, and then
room temperature displayed.
ON
OFF
played.
OFF:
1. Press
2. Press
Mode.
3. Press
4. Press
SETTING:
1.
Press
AM
PM
played, temperature flashes.
2. To adjust SET temperature press
ON
OFF
or
3. T
PROGRAM MODE
ON:
Press
AM
PM
displayed.
ON
OFF
OFF:
1. Press
AM
PM
Manual Mode.
2. Press
ON
OFF
Mode.
NOTE: The set temperature for Thermostatic Mode is the tem-
perature for the ON time in Program Mode. Changing
the Thermostatic Mode set temperature also changes
the ON time temperature in Program Mode.
OWNER'S
INFORMATION
button.
displayed, preset
button.
or
button to enter Manual
button to enter Program Mode.
button to enter Eco mode.
button and hold until
dis-
button.
button or wait.
button.
,
or , ON or OFF
or
or
button to enter
button to enter Thermostatic
13
Advertisement
Table of Contents
