Valor 1100IN Danger A Barrier Designed To Reduce The Risk Of Burns From The Hot Viewing Glass Is Provided With Th page 12

OWNER'S
INFORMATION
MANUAL MODE (HANDSET) )
NOTICE
BEFORE OPERATING
Make sure MANUAL knob on the GV60 Valve is in the ON,
full counterclockwise
TO TURN ON FIRE
W
Handset One-Button Operation
(Default Setting)
AM
PM
Press
seconds until two short beeps and
ON
OFF
a blinking series of lines confirms
the start sequence has begun;
release button.
Main
Handset automatically goes into man-
ual mode after main burner ignition.
NOTICE
To change from one-button to two-button ignition operation,
go to page 1 for instructions.
Handset Two-Button Operation
Press
AM
PM
until two short beeps and a blinking
ON
OFF
quence has begun; release buttons.
Main
Handset automatically goes into man-
ual mode after main burner ignition.
NOTICE
To change from two-button to one-button ignition operation,
go to page 1 for instructions.
If the pilot does not stay lit after several tries, turn the gas control
knob to OFF ( ) and call your local service technician or gas OFF
supplier. See page 17 for more information.
STANDBY MODE (PILOT FLAME)
Handset
Press and hold button
12
Remote Control Operation
position.
button and hold for four
and button simultaneously
TO TURN OFF FIRE
AM
PM
ON
OFF
FLAME HEIGHT ADJUSTMENT
AM
PM
ON
OFF
DESIGNATED LOW FIRE AND HIGH FIRE
AM
-
AM
Handset
Press button and hold for four
seconds to turn OFF.
NOTE: There is a 5 sec delay before
the next ignition is possible.
IMPORTANT: If the display on the
handset indicates OFF, it may not
mean that the fire is off. Always
check the fire and pilot visually
to ensure they are off.
Handset
T
hold button.
T
button.
T
ton. "LO" is displayed.
NOTE: Flame
T
ton. "HI" is displayed.
-
but-
-
but-