How To Turn Your Fireplace Off (Including Pilot); How To Ensure Your Fireplace Cannot Be Turned On Inadvertently - Valor 1100IN Danger A Barrier Designed To Reduce The Risk Of Burns From The Hot Viewing Glass Is Provided With Th

OWNER'S
INFORMATION
How to Turn Your Fireplace OFF
(including pilot)
Familiarize yourself with each of the following methods
before operating your fi replace.
Press and hold for 4 seconds the
handset or OFF button on the optional wall switch.
NOTE: The fi rst tap on the button "wakes up" the
handset. Tap again to use the function.
AM
Remote control handset
If the fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
As well, familiarize yourself with the gas shut-off valve
location in your house. As indicated below, the gas is
running when the handle is parallel with the pipe. The
gas is off when the handle is perpendicular with the
pipe.
ON: parallel to pipe
10
Owner's Information
button on the
Wall Switch
(optional)
OFF:
perpendicular
to pipe
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your fi replace will not turn on when you
don't want it on.
First, ensure your fi replace is turned off—including
the pilot—and cold BEFORE going ahead.
Receiver
• Turn the dial on the gas valve from the ON position
to the MAN position as shown. Turning the dial to
MAN (arrow up) will ensure that the main burner
can not come on. The pilot will remain on if it is lit.
ON
• Alternately, remove all batteries from the receiver
as well as the battery from the handset.
Automatic Shut-Off (in certain conditions)
Your fi replace's remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See page 15 in the Remote Control
Operation section for a description of this feature.
Gas valve
Gas valve