Valor L2 Series Installation Manual

INSTALLATION MANUAL
1730CIK Clean Install Kit
Use with Valor L2 1700 Heater Models ONLY (series K or later)
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
The 1730 Clean Installation Kit installs at the time of
framing the appliance. Wall fi nishes are then applied and
butted directly up to the outer frame.
This kit is not intended to and cannot be installed with
any other trim.
See appliance installation manual for more
information about finishing around this kit.
4007975-01
©2019, Miles Industries Ltd.
L2 Series
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Depth
15/16"
[24 mm]
51-1/16" [1296 mm]
I N S T AL LE R
L e a v e t h i s m a n u a l
w i t h t h e a p p l i a n c e .
C O NS U M E R
Retain this manual
for future reference.
Note: This kit must be installed
by a qualifi ed installer, service
agency or gas supplier at the time
of the heater installation. These
instructions are to be used in
conjunction with the fi replace
main installation instructions.
WARNING
HeatShift System IS REQUIRED when
installing the 1730CIK Clean Install Kit.
1700
engine
Left hand
door
Cover
plate
Barrier
screen
Overview
Right
hand door
CIK assembly