Remove The Card Path Step Mount Assembly (D940258) - Fargo HDP8500 Service Manual

Remove the Card Path Step Mount Assembly (D940258)

Step Procedure
1
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
2 Disconnect the Lam Motor Connection
HDP8500 Service Manual, PLT-01583, 1.1
Tools needed: T10 Torx Driver
Estimated Time: 30 minutes
Preparation: Remove the Covers.
Remove the Card Path.
Suggestion: Lay the printer on the front side for ease of
accessing the motors.
Important: This procedure can only be performed by
authorized service personnel.
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
67