Main Printer Modules Removal; Remove The Fan Box/Bracket Assembly (D940005) - Fargo HDP8500 Service Manual

Main Printer Modules Removal

Remove the Fan Box/Bracket Assembly (D940005)

Step Procedure
1
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
2 Remove the Auxiliary Board (A920221-10)
Unplug the RTD Wire Cable, Heater Wire Cable, and Interconnect Cable (with small com
board D940171) from the Auxiliary Board (A920221-10).
HDP8500 Service Manual, PLT-01583, 1.1
Tools needed: T10 Torx Driver
Estimated Time: 20 minutes
Preparation: Remove Rear/Top Cover.
Important: This procedure can only be performed by
authorized service personnel.
Note: Removing this assembly is required for many
procedures.
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
24