Printer Board Removal; Remove The Mainboard (A940234) - Fargo HDP8500 Service Manual

Printer Board Removal

Remove the Mainboard (A940234)

Step Procedure
1
Caution: Power off the Printer by unplugging the power cord from the Printer.
Note: The PCB Transition Station Board (D940171), PCB Station Interface Extension board
(D940170), and the PCB Flip Station Interface/ IO board (D940195) are connected to the
Mainboard.
2 Remove the Covers, Card Path and Main Chassis to access the Mainboard located on the
BASE.
HDP8500 Service Manual, PLT-01583, 1.1
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Tools needed: T10 Torx Driver
Estimated Time: 30 minutes
Preparation: Remove the Covers.
Remove the Card Path.
Remove the Main Chassis.
Important: This procedure can only be
performed by authorized service personnel.
36