Fargo HDP8500 Service Manual page 119

HDP8500 Service Manual, PLT-01583, 1.1
Remove/Replace the Rewind Motor (D900406) and Gear (D920170) (cont.)
Step Procedure
7 Reverse the instructions to re-assemble.
a. Line up the bottom of the Rewind Motor on the tabs.
b. Snap the top rewind Motor to the Frame into the tab provided.
c. Replace the Sensor by (1) inserting the tab into one of the two (2) holes on the Sensor and
by (2) snapping it onto the 2nd tab.
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
119