Step Procedure
7
Bottom Roller #3 Cleaning Roller (D940100 with bearing D940169)
Ensure the flat on the bearing is aligned with the flat in the Sideplate hole.
Verify roller rolls freely
8
Bottom Roller #4 Transfer Roller ( D940105)
Long end goes to the LEFT side.
Ensure the flat on the bearing is aligned with the flat in the Sideplate hole.
(Continued next page)
(continued next page)
HDP8500 Service Manual, PLT-01583, 1.1
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
48