Log Backup; Log Backup To Http; Log Backup To Tftp - Fujitsu SH-E514TR1 10 User Manual

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
Source File: Enter the source filename and path of the configuration file located on the switch here. This field can be
up to 32 characters long. Select the running-config option to back up the running configuration file from the Switch.
Select the startup-config option to back up the start-up configuration file from the Switch.
Destination File: Enter the destination filename and path where the configuration file should be stored on the TFTP
server. This field can be up to 32 characters long.
Click Backup to save the current settings to the TFTP server.

Log Backup

Allow the logs to be saved to HTTP or TFTP.
Figure 5-14 – Tools > Log Backup

Log Backup to HTTP

This window is used to back up the logs to HTTP.
Figure 5-15 Log Backup to HTTP
The fields that can be configured are described below:
Log Type: Select the log type that will be backed up to the local PC using HTTP. When the System Log option is
selected, the system log will be backed up. When the Attack Log is selected, the attack log will be backed up.
Click Backup to save the current settings to your disk.

Log Backup to TFTP

This window is used to back up the logs to TFTP.
Figure 5-16 Log Backup to TFTP
The fields that can be configured are described below:
TFTP Server IP: Back up the log from a remote TFTP server. Specify the TFTP server IP address.
Destination File: Enter the destination filename and path where the log file should be stored on the TFTP server. This
field can be up to 32 characters long.
Log Type: Select the log type that will be backed up to the TFTP server. When the System Log option is selected,
the system log will be backed up. When the Attack Log is selected, the attack log will be backed up.
Click Backup to save the current settings to the TFTP server.
12