Fujitsu SH-E514TR1 10 User Manual page 41

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
Figure 9-9 VLAN Interface Information
Click Back to return to the previous window.
After click Edit, the following window will appear. This is a dynamic window that will change when a different VLAN
Mode was selected. When Hybrid was selected as the VLAN Mode, the following window will appear.
Figure 9-10 Configure VLAN Interface - Hybrid
The fields that can be configured are described below:
VLAN Mode: Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk.
Acceptable Frame: Select the acceptable frame behavior option here. Options to choose from are Tagged Only,
Untagged Only, and Admit All.
Ingress Checking: Enable or disable the ingress checking function.
Native VLAN: Tick to enable the native VLAN function.
VID: After Native VLAN is selected, this option will be available. Enter the VLAN ID used for this configuration here.
This value must be between 1 and 4094.
Action: Select the action that will be taken here. Options to choose from are Add, Remove, Tagged, and Untagged.
Add Mode: Select whether to add an Untagged or Tagged parameters.
Allowed VLAN Range: Enter the allowed VLAN range information here.
When Access is selected as the VLAN Mode, the following window will appear.
Figure 9-11 Configure VLAN Interface - Access
36