Web; Session Timeout; File System - Fujitsu SH-E514TR1 10 User Manual

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual

Web

This window is used to configure the Web settings on the Switch.
Figure 8-11 Web
The fields that can be configured are described below:
Port: Enter the TCP port number used for Web-based management of the Switch. The "well-known" TCP port for the
Web-based protocol is 80.
Click Apply to accept the changes made.

Session Timeout

This window is used to configure the session timeout.
Figure 8-12 Session Timeout
The fields that can be configured are described below:
Web Session Timeout: Enter the time in seconds of the web session timeout. Tick Default to return to the default
setting. The value is from 60 to 36000 seconds. The default value is 180 seconds.
Click Apply to accept the changes made.

File System

The File System is used to provide the user with flexible file operation on the Flash. All the firmware, configuration
information and system log information are stored in the Flash as files.
Figure 8-13 File System
The fields that can be configured are described below:
Path: Enter the path string
Click Go to navigate to the path entered.
Click the C: hyperlink to navigate the C: drive.
After clicking the C: hyperlink, the following window will appear.
30