Fujitsu SH-E514TR1 10 User Manual

Fujitsu SH-E514TR1 10 User Manual

Gigabit ethernet smartpro switch
Table of Contents

Advertisement

Quick Links

Fujutsu SH-E514TR1 10 Gigabit Ethernet SmartPro Switch
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu SH-E514TR1 10

  • Page 1 Fujutsu SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual...
  • Page 2 FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 3: Table Of Contents

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Table of Contents Intended Readers ..............................1 Terms/Usage ................................. 1 Safety Instructions ................................. 1 General Precautions for Rack-Mountable Products ...................... 2 Protecting Against Electrostatic Discharge ........................3 Product Introduction ............................... 4 Getting Started ................................. 5 Recommended Web Browsers ............................
  • Page 4 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Management ................................24 User Accounts Settings ............................... 24 SNMP ..................................24 SNMP Global Settings ............................. 24 SNMP Linkchange Trap Settings ..........................25 SNMP View Table Settings ............................26 SNMP Community Table Settings ........................... 26 SNMP Group Table Settings............................
  • Page 5 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Port Security ................................56 Port Security Global Settings ........................... 56 Port Security Port Settings ............................56 Port Security Address Entries ..........................57 Traffic Segmentation Settings ............................. 57 Storm Control ................................58 13. Monitoring................................60 Utilization ..................................
  • Page 6: Intended Readers

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Intended Readers This guide provides instructions to install the SH-E514TR1 10 Gigabit Ethernet SmartPro Switch, and how to configure Web-based Management step-by-step. Terms/Usage In this guide, the term “Switch” (first letter capitalized) refers to the SH-E514TR1 switch, and “switch” (first letter lower case) refers to other Ethernet switches.
  • Page 7: General Precautions For Rack-Mountable Products

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual  To help avoid damaging your system, be sure the voltage on the power supply is set to match the power available at your location: 115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as...
  • Page 8: Protecting Against Electrostatic Discharge

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual CAUTION: Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.
  • Page 9: Product Introduction

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Product Introduction Thank you and congratulations on your purchase of SH-E514TR1 10 Gigabit Ethernet SmartPro Switch. The product blends plug-and-play simplicity with exceptional value and reliability for small and medium-sized business (SMB) networking. All models are housed in a new style rack-mount metal case with easy-to-view front panel diagnostic LEDs, and provides advanced features including network security, traffic segmentation, QoS and versatile management.
  • Page 10: Getting Started

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Getting Started The Switch can be managed through any port on the device by using the Web-based Management. Each switch must be assigned its own IP Address, which is used for communication with the Web-based Management or a SNMP network manager.
  • Page 11 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 3-2 Login Dialog Box NOTE: The Switch's factory default username is admin and the default password is admin.
  • Page 12: Web-Based Management

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Web-based Management The features and functions of the Switch can be configured for optimum use through the Web-based Management Utility. After logged into the Switch, you will see the screen below: Tool Bar...
  • Page 13: Tool Bar

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Tool Bar Save The Save Menu provides the Save Configuration function. Figure 5-1 Save Save Configuration Select to save the entire configuration changes you have made to the device to switch’s non-volatile RAM.
  • Page 14: Firmware Upgrade From Http

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Firmware Upgrade from HTTP This window is used to upgrade the firmware from HTTP. Figure 5-5 Firmware Upgrade from HTTP The fields that can be configured are described below: Source File: Click Browse to browse your inventories for a saved firmware file.
  • Page 15: Firmware Backup To Tftp

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Click Backup to save the firmware to your disk. Firmware Backup to TFTP This window is used to back up the firmware to TFTP. Figure 5-8 Firmware Backup to TFTP The fields that can be configured are described below: TFTP Server IP: Backup the firmware to a remote TFTP server.
  • Page 16: Configuration Restore From Tftp

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Click Restore after selecting the backup settings file you want to restore. Configuration Restore from TFTP This window is used to restore the configuration from TFTP. Figure 5-11 Configuration Restore from TFTP The fields that can be configured are described below: TFTP Server IP: Restore the configuration from a remote TFTP server.
  • Page 17: Log Backup

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Source File: Enter the source filename and path of the configuration file located on the switch here. This field can be up to 32 characters long. Select the running-config option to back up the running configuration file from the Switch.
  • Page 18: Ping

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Ping Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node then responds to or “echoes” the packets sent from the Switch. This is very useful to verify connectivity between the Switch and other nodes on the network.
  • Page 19: Reboot System

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 5-19 Reset Select the The Switch will be reset to its factory defaults including IP address, and then will save and reboot. option to reset the Switch’s configuration to its factory default settings.
  • Page 20: Device Information

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Device Information This window displays the Device Information. It appears automatically when you log in the Switch. To return to the Device Information window after viewing other windows, click SH-E514TR1 in the Function Tree.
  • Page 21: System

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual System System Information Settings The System Information Settings allows the user to configure a System Name, System Location, and System Contact to aid in defining the Switch. Figure 7-1 System Information Settings The fields that can be configured are described below: System Name: Enter a system name for the Switch, if so desired.
  • Page 22: Port Status

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 7-3 Port Settings The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here. State: Select this option to enable or disable the physical port here.
  • Page 23: Error Disable Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 7-4 Port Status Error Disable Settings This window is used to configure the error disable recovery settings. Figure 7-5 Error Disable Settings The fields that can be configured are described below: ErrDisable Cause: Select the error disable causes here.
  • Page 24: System Log

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 7-6 Jumbo Frame The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here. Maximum Receive Frame Size: Enter the maximum receive frame size value here. This value must be between 64 and 9216 bytes.
  • Page 25: System Log Discriminator Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Write Delay: Enter the interval for periodic writing of the logging buffer to FLASH. This value must be between 0 and 65535 seconds. By default, this value is 300 seconds. Tick Infinite to disable the write delay feature.
  • Page 26: System Log

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Severity: Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
  • Page 27: Clock Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Clock Settings The Simple Network Time Protocol (SNTP) is a protocol for synchronizing computer clocks through the Internet. It provides comprehensive mechanisms to access national time and frequency dissemination services, organize the SNTP subnet of servers and clients, and adjust the system clock in each participant.
  • Page 28: Sntp Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Recurring Setting - Select to configure the summer time that should start and end on the specified week day of the specified month. Date Setting - Select to configure the summer time that should start and end on the specified date of the specified month.
  • Page 29: Management

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Management User Accounts Settings This window is used to create and configure the user accounts. The active user account sessions can be viewed. There are two user account privilege available, User and Administrator: ...
  • Page 30: Snmp Linkchange Trap Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 8-3 SNMP Global Settings The fields that can be configured are described below: SNMP Global State: Enable or disable the SNMP feature. SNMP Response Broadcast Request: Enable or disable the server to response to broadcast SNMP GetRequest packets.
  • Page 31: Snmp View Table Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here. Trap Sending: Enable or disable the sending of the SNMP notification traps that is generated by the system.
  • Page 32: Snmp Group Table Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 8-6 SNMP Community Table Settings The fields that can be configured are described below: Key Type: Select the key type for the SNMP community. Options to choose from are Plain Text and Encrypted.
  • Page 33: Snmp Engine Id Local Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual SNMPv2c - Select to allow the group user to use the SNMPv2c security model. SNMPv3 - Select to allow the group user to use the SNMPv3 security model. Security Level: When selecting SNMPv3 in the User-based Security Model drop-down list, this option is available.
  • Page 34: Snmp Host Table Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Group Name: Enter the SNMP group name to which the user belongs. The syntax is general string that does not allow spaces. SNMP V3 Encryption: Select the SNMPv3 encryption method. Options to choose from are None, Password, and Key.
  • Page 35: Web

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual This window is used to configure the Web settings on the Switch. Figure 8-11 Web The fields that can be configured are described below: Port: Enter the TCP port number used for Web-based management of the Switch. The “well-known” TCP port for the Web-based protocol is 80.
  • Page 36 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 8-14 File System (Search for Drive) Click Previous to return to the previous window. Click Create Directory to create a new directory within the file system of the Switch. Click Copy to copy a specific file to the Switch.
  • Page 37: L2 Features

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual L2 Features Static FDB Unicast Static FDB This window is used to view and configure the unicast static FDB settings. Figure 9-1 Unicast Static FDB The fields that can be configured are described below: Port: Select the port used for the configuration here.
  • Page 38: Mac Address Table Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Click Delete to remove the specified entry. Enter a page number and click Go to navigate to a specific page when multiple pages exist. MAC Address Table Settings This window is used to view and configure the MAC address table’s global settings.
  • Page 39: Vlan

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 9-5 MAC Address Table The fields that can be configured are described below: Port: Select the port that will be used for this configuration here. VID: Enter the VLAN ID that will be used for this configuration here.
  • Page 40: Vlan Interface

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Click Apply to accept the changes made. Click Find to locate a specific entry based on the information entered. Click View All to locate all the entries. Click Edit to re-configure the specific entry.
  • Page 41 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 9-9 VLAN Interface Information Click Back to return to the previous window. After click Edit, the following window will appear. This is a dynamic window that will change when a different VLAN Mode was selected.
  • Page 42: Stp

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual VLAN Mode: Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. Acceptable Frame: Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All.
  • Page 43: Stp Port Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 9-13 STP Global Settings The fields that can be configured are described below: STP State: Enable or disable the STP global state here. STP New Root Trap: Enable or disable the STP new root trap option here.
  • Page 44 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 9-14 STP Port Settings The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here. Cost: Enter the cost value here. This value must be between 1 and 200000000. This value defines a metric that indicates the relative cost of forwarding packets to the specified port list.
  • Page 45: Stp Global Information

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual STP Global Information This window is used to display the STP global information. Figure 9-15 STP Global Information STP Port Information This window is used to view and configure the STP port information settings.
  • Page 46 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Load balancing is automatically applied to the ports in the aggregated group, and a link failure within the group causes the network traffic to be directed to the remaining links in the group.
  • Page 47: L2 Multicast Control

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 9-18 Port Channel Click Edit to re-configure the specific entry. Click Back to return to the previous window. L2 Multicast Control IGMP Snooping IGMP Snooping Settings In order to use IGMP Snooping it must first be enabled for the entire Switch under IGMP Global Settings at the top of the window.
  • Page 48 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Click Find to locate a specific entry based on the information entered. Click Find All to view all the entries. Click Show Detail to see the detail information of the specific VLAN.
  • Page 49 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 9-21 IGMP Snooping VLAN Settings The fields that can be configured are described below: Minimum Version: Select the minimum version of IGMP hosts that is allowed on the VLAN. Querier State: Enable or disable the querier state.
  • Page 50: Igmp Snooping Groups Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual IGMP Snooping Groups Settings This window is used to configure and view the IGMP snooping static group, and view IGMP snooping group. Figure 9-22 IGMP Snooping Groups Settings The fields that can be configured are described below: VID: Enter a VLAN ID of the multicast group.
  • Page 51: Igmp Snooping Statistics Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual VID: Enter a VLAN ID between 1 and 4094. Configuration: Select the port configuration. Options to choose from are Port and Forbidden Port. Port - Select to have the configured ports to be static multicast router ports.
  • Page 52 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 9-25 Multicast Filtering The fields that can be configured are described below: VID List: Enter the VLAN ID list that will be used for this configuration here. Multicast Filter Mode: Select the multicast filter mode here. Options to choose from are Forward Unregistered, Forward All, and Filter Unregistered.
  • Page 53: 10. L3 Features

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual 10. L3 Features IPv4 Interface This window is used to configure the IPv4 interface settings. Figure 10-1 IPv4 Interface (IPv4 Interface Settings) The fields that can be configured are described below: Get IP From: Select the get IP from option here. Options to choose from are Static and DHCP. When the Static option is selected, users can enter the IPv4 address of this interface manually in the fields provided.
  • Page 54: Ipv6 Neighbor

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 10-3 IPv6 Interface (IPv6 Interface Settings) The fields that can be configured are described below: IPv6 State: Select to enable or disable the IPv6 interface’s global state here. IPv6 Address: Enter the IPv6 address for this IPv6 interface here. Select EUI-64 to configure an IPv6 address on the interface using the EUI-64 interface ID.
  • Page 55 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Click Apply to accept the changes made. Click Find to locate a specific entry based on the information entered. Click Clear All to clear all the information in this table. Click Delete to remove the specific entry.
  • Page 56: 11. Qos

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual 11. QoS Basic Settings Port Default CoS This window is used to view and configure the port’s default CoS settings. Figure 11-1 Port Default CoS The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here.
  • Page 57: Port Scheduler Method

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Port Scheduler Method This window is used to view and configure the port scheduler method settings. Figure 11-2 Port Scheduler Method The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here.
  • Page 58: Queue Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Queue Settings This window is used to view and configure the queue settings. Figure 11-3 Queue Settings The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here.
  • Page 59: Cos To Queue Mapping

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual CoS to Queue Mapping This window is used to view and configure the CoS-to-Queue mapping settings. Figure 11-4 CoS to Queue Mapping The fields that can be configured are described below: Queue ID: Select the queue ID that will be mapped to the corresponding CoS value. Options to choose from are 0 to Click Apply to accept the changes made.
  • Page 60: Dscp Cos Mapping

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual DSCP CoS Mapping This window is used to view and configure DSCP CoS mapping. Figure 11-6 DSCP CoS Mapping The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here.
  • Page 61: 12. Security

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual 12. Security Port Security Port Security Global Settings This window is used to view and configure the port security global settings. Port Security is a security feature that prevents unauthorized computers (with source MAC addresses) unknown to the Switch prior to locking the port (or ports) from connecting to the Switch's locked ports and gaining access to the network.
  • Page 62: Port Security Address Entries

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Restrict - Drop all packets from the insecure hosts at the port-security process level and increments the security-violation count and record the system log. Shutdown - Shut down the port if there is a security violation and record the system log.
  • Page 63: Storm Control

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual If the forwarding domain of an interface is empty, then there is no restriction on Layer 2 forwarding of packets received by the port. Figure 12-4 Traffic Segmentation Settings The fields that can be configured are described below: From Port / To Port: Select the receiving port range used for the configuration here.
  • Page 64 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Interval: Enter the interval value used here. This value must be between 5 and 600 seconds. By default, this value is 5 seconds. Retries: Enter the retries value used here. This value must be between 0 and 360. By default, this value is 3. Tick the Infinite option to disable this feature.
  • Page 65: 13. Monitoring

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual 13. Monitoring Utilization Device Utilization This window is used to display CPU, and Used status. Figure 13-1 Device Utilization Port Utilization This window is used to display the percentage of the total available bandwidth being used on the port.
  • Page 66: Port

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Port This window is used to display the packet statistics of ports. Figure 13-3 Port The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here.
  • Page 67 SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual After clicking Show Detail, the following window will appear. Figure 13-4 Port Detail Click Back to return to the previous window. Click Refresh to refresh the display table.
  • Page 68: Port Counters

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Port Counters This window is used to display port counter statistics. Figure 13-5 Port Counters The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here.
  • Page 69: Counters

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Click Back to return to the previous window. Click Refresh to refresh the display table. Counters This window is used to display all port counters, and clear the port counters of the specified or all ports.
  • Page 70: Mirror Settings

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual Figure 13-8 Port Counters Detail Click Back to return to the previous window. Click Refresh to refresh the display table. Mirror Settings This window is used to view and configure the mirror feature’s settings. The Switch allows users to copy frames transmitted and received on a port and redirect the copies to another port.
  • Page 71: Device Environment

    SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual The fields that can be configured are described below: Destination: Tick the checkbox, next to the Destination option, to configure the destination for this port mirror entry. In the first drop-down list select the Port option. In the second drop-down list select the destination switch’s port number.

Table of Contents