Queue Settings - Fujitsu SH-E514TR1 10 User Manual

Gigabit ethernet smartpro switch

Table of Contents

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual

Queue Settings

This window is used to view and configure the queue settings.

Figure 11-3 Queue Settings

The fields that can be configured are described below:

From Port / To Port: Select the appropriate port range used for the configuration here.

Queue ID: Select the queue ID value here. Options to choose from are 0 to 7.

WRR Weight: Enter the WRR weight value here. This value must be between 0 and 127. To satisfy the behavior

requirements of Expedited Forwarding (EF), the highest queue is always selected by the Per-hop Behavior (PHB) EF

and the schedule mode of this queue should be strict priority scheduling. So the weight of the last queue should be

zero while the Differentiate Service is supported.

Click Apply to accept the changes made.

Table of Contents