Connection Of An Extension Module (Extension Connector Type) - Mitsubishi Electric MELSEC iQ-F Series User Manual

Connection of an extension module (extension connector type)

FX5S FX5UJ
This subsection describes how to connect the extension module (extension connector type).
A connector conversion module is required to connect an extension connector type module to an FX5UJ CPU module system
and an FX5U CPU module system.
A
A
4 4
A
12 INSTALLATION
158
12.3 Method for Connection of Extension Devices
FX5U FX5UC
B
C
A
4 4
3
3
3
1.
Slide the extension module joint levers (A in the figure)
of the existing module (left side).
2.
Remove the extension connector cover (B in the figure).
3.
Connect the extension module as shown in the left
figure.
4.
Slide the extension module joint levers (A in the figure)
of the existing module to fix the extension module (C in
the figure).