Removing A Hard Drive From A Hard Drive Carrier - Dell PowerEdge R730xd Owner's Manual

Figure 28. Installing a hard drive carrier into the hard drive tray
1. release tab on the hard drive tray
3. hard drive carrier
Related Links
Safety instructions
Removing a hard drive blank from a hard drive carrier
Before working inside your system

Removing a hard drive from a hard drive carrier

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
CAUTION: To maintain proper system cooling, all empty hard drive slots must have hard drive
blanks installed.
Steps
1. Push out at the edges of the carrier to disengage the tabs on the hard drive carrier from the slots on
the hard drive.
2. Lift the hard drive carrier away from the hard drive.
2. hard drive carrier handle
91