Removing A Hard Drive Carrier From The Hard Drive Tray - Dell PowerEdge R730xd Owner's Manual

Steps
1. Align the tabs on the hard drive carrier with the slots on the hard drive blank.
2. Pull the edges of the carrier to fit over the hard drive blank.
3. Lower the hard drive carrier onto the hard drive blank to secure it.
Figure 26. Installing a hard drive blank into a hard drive carrier
1. hard drive blank
3. hard drive carrier
Next steps
Follow the procedure listed in the After working inside your system section
Related Links
Safety instructions
Before working inside your system
After working inside your system

Removing a hard drive carrier from the hard drive tray

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. From the management software, prepare the hard drive for removal. Wait until the indicators on the
hard drive carrier signal that the hard drive can be removed safely. For more information, see the
documentation for the storage controller at Dell.com/storagecontrollermanuals.
88
2. tab on the hard drive carrier (4)