Installing The Optional Internal Dual Sd Module - Dell PowerEdge R730xd Owner's Manual

Convention
E
Next steps
1. Install the IDSDM.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
System board jumpers and connectors
Removing an internal SD card

Installing the optional internal dual SD module

After working inside your system
Installing the optional internal dual SD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
NOTE: Temporarily label each SD card with its corresponding slot before removal.
Steps
1. Locate the internal dual SD module (IDSDM) connector on the system board. To locate the internal
dual SD module connector, see the System board connectors section.
2. Align the IDSDM with the connector on the system board.
3. Push the IDSDM until it is firmly seated on the system board.
IDSDM indicator code
Not lit
Description
Indicates that the card is missing or is booting.
149