Quick Sync indicator codes
Figure 12. Quick Sync
1.
Quick Sync Status Indicator
Table 13. Quick Sync indicator codes
Quick Sync
indicator pattern
Slow blink
Solid
Blinks three times
rapidly and then
turns off
Blinks continuously
when the mobile
device touches
antenna
Blinks rapidly
continuously when
the activation button
is pressed
Turns off
Locating Service Tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. The Express Service
Code and Service Tag are found on the front of the system by pulling out the information tag.
Condition
Quick Sync is waiting to be configured from iDRAC.
Quick Sync is ready to transfer.
Quick Sync feature is disabled from iDRAC.
Indicates data transfer activity.
Quick Sync hardware is not responding properly.
Indicates that the Quick Sync feature is turned off. Use the activation button to
activate it. If pressing the activation button does not turn on the LEDs, it indicates
that power is not delivered to the Quick Sync bezel.
2.
Quick Sync Activation Button
27