Installing The Riser 1 Blank - Dell PowerEdge R730xd Owner's Manual

3. riser 1 blank
Next steps
1. Install the expansion card risers.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing expansion card risers
Installing expansion card risers
After working inside your system

Installing the riser 1 blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Steps
To install the riser 1 blank, align the blank with the slot on the chassis and insert it into the chassis
until it clicks into place.
Figure 57. Installing the riser 1 blank
1. slot on the chassis
136
2. tab (2)