Control Panel Assembly; Removing The Control Panel - Dell PowerEdge R730xd Owner's Manual

Steps
1. Slide the vFlash media unit in and align it with the v Flash media slot on the back of the chassis.
2. Connect the cable to the vFlash media unit.
3. Insert and tighten the screw securing the vFlash media unit to the chassis.
Figure 122. Installing the vFlash media unit
1. cable
3. vFlash media unit
5. standoff
Next steps
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system

Control panel assembly

Removing the control panel

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
210
2. screw
4. vFlash media slot