Installing A Hard Drive Into A Hard Drive Carrier - Dell PowerEdge R730xd Owner's Manual

Figure 99. Removing a hard drive into a hard drive carrier
1. screw (4)
3. hard drive carrier
Related video
http://www.Dell.com/QRL/Server/PER730/HDD
Related Links
Removing a hot swappable hard drive or SSD
Installing a hot-swap hard drive

Installing a hard drive into a hard drive carrier

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Steps
1. Insert the hard drive into the hard drive carrier with the connector end of the hard drive toward the
back of the carrier.
2. Align the screw holes on the hard drive with the screws holes on the hard drive carrier.
When aligned correctly, the back of the hard drive is flush with the back of the hard drive carrier.
3. Attach the screws to secure the hard drive to the hard drive carrier.
2. hard drive
185