Table of Contents
Advertisement
H. INSTALLING / REMOVING OUTSIDE LEVER
(Key-In-Lever models only, for interchangeable
and removable cores proceed to section I)
Note: Installing levers to the unit
assemblies before mounting the unit
assemblies may ease initial installation.
H-1 Make certain the lever catch is up as shown (c).
Position the lever sleeve (f) tab correctly with the
respective notch on the lever. The lock comes
shipped with the lever sleeve already installed in
the lock housing. When installing lever, ensure it is
oriented to engage the lever sleeve to accommodate
desired lock handing as shown.
H-2 Insert one of the (supplied) keys (a) into the outside
lever (b) and rotate key counterclockwise 45 degrees.
H-3 Insert the outside lever until it is flush to the outside
unit assembly. Secure the outside lever by rotating
the key clockwise 45 degrees to horizontal position.
Remove key.
Note: To remove the outside lever from the
outside unit assembly, follow the steps below.
H-4 Insert one of the (supplied) keys (a) into the outside lever
(b) and rotate it counterclockwise 45 degrees. Insert
release tool (d) into the small hole (e) under lever as
shown. Gently push lever catch up until it clicks.
Remove tool, then remove outside lever (b).
I. INSTALLING / REMOVING OUTSIDE LEVER
(Interchangeable / Removable Core Models)
Note: Installing levers to the unit assemblies
before mounting the unit assemblies may
ease initial installation.
I-1
Make certain the lever catch is up as shown (c).
Position the lever sleeve (f) tab correctly with the
respective notch on the lever. The lock comes shipped
with the lever sleeve already installed in the lock
housing. When installing lever, ensure it is oriented to
engage the lever sleeve to accommodate desired lock
handing as shown.
Note: For all interchangeable/removable cylinders except ASSA/Medeco/Yale,
proceed to section I-2. For ASSA/Medeco/Yale cylinders, skip to section I-5.
c
Correct
Incorrect
Position
Position
KIL Lever Sleeve
f
LH
RH
b
a
45º
b
a
e
d
c
Correct
Incorrect
Position
Position
f
IC Lever Sleeve
RH
LH
9
Advertisement
Table of Contents
