Setting The Water Hardness Level - Miele PG 8061 Operating Instructions Manual

Filling the salt container
28

Setting the water hardness level

The water softener can be set to between 0 and 73 gpg (0 - 70 °dH
German scale).
Select the Additional settings

Water hardness
Select

Water hardness
°dH
19
(0 - 70 °dH)
The factory default setting for the water softener is a hardness of 20
gpg (19°dH German scale).
Please observe the table below when setting the hardness level.
If the water hardness fluctuates, e.g. between 8 and 18 gpg (8 and 17
°dH German scale), always be sure to set the dishwasher to the
higher value, 18 gpg (17 °dH German scale) in this example.
Use the arrow buttons  (higher) and  (lower) to set the required

water hardness level, and confirm your entry with the OK button.
menu.
and confirm your choice with the OK button.