Unusual Behavior Of The Dishwasher - Miele PG 8061 Operating Instructions Manual

Commercial dishwasher
Hide thumbs Also See for PG 8061:
Table of Contents

Advertisement

Frequently asked questions

Unusual behavior of the dishwasher

Problem
The dishwasher fails to re-
act when buttons are
pressed. The display and
indicator lights remain
dark.
The following fault mes-
sage is appears in the dis-
play:
Salt container lid not closed
correctly
The dispenser cover can-
not be closed.
The inside of the door and/
or the interior walls are
wet after a program has
finished.
There is still water in the
wash cabinet at the end of
the program.
(This does not apply to the
"Super Short" program.)
104
Possible cause and solution
The dishwasher has turned itself off after the set Switch-off
time to save energy.
Press the  button to turn the dishwasher on again.
The salt reservoir cover is not properly closed.
Close the salt reservoir cover.
Detergent residue is blocking the latch.
Remove the detergent residue.
This is not a fault.
It is caused by the drying system.
The moisture will dissipate after a short while.
Before remedying the fault:
Turn the dishwasher off using the  button.
The filter combination in the wash cabinet is clogged.
Clean the filter combination (see "Cleaning and care").
The drain pump or non-return valve is blocked.
Clean the drain pump or the non-return valve (see "Fre-
quently asked questions").
The drain hose is kinked.
Remove the kink.
The on-site drain trap is clogged.
Check and clean the drain trap.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents