Basic Settings; Setting The Language; Setting The Water Hardness Level - Miele G5740 SC Operating Instructions Manual

Basic settings

Switching on the dishwasher
 Switch the dishwasher on with the
 button.
The welcome screen will appear when
the dishwasher is switched on.
For further information about the dis-
play functionality, see the "Display
functions" section in the "Guide to the
appliance" chapter.

Setting the language

The display will then change automatic-
ally to the screen for setting the lan-
guage.
 Select the language you want as well
as the country, if applicable, using
the  buttons and confirm with OK.
For further information on setting the
language, see the "Language" section
in the "Settings" chapter.
A tick  will appear next to the lan-
guage that has been set.
Before using for the first time

Setting the water hardness level

The display will change to the screen
for setting the water hardness.
- You should programme the dish-
washer to the correct water hardness
for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °dH - German scale) always pro-
gramme the dishwasher to the higher
value (2.7 mmol/l or 15 °dH in this ex-
ample).
In the event of a fault, it will help the
service technician if you know the hard-
ness of your local water supply.
Therefore, please enter the water hard-
ness:
____________°dH or mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).
 Set the water hardness level in your
area and confirm using OK.
See the "Settings" chapter, "Water
hardness" section for more informa-
tion.
23