Additional Functions; Resetting - Miele PG 8061 Operating Instructions Manual

Resetting

Additional functions

With these functions, it is possible to adjust individual parameters to
adapt program cycles to particular types of soiling and optimize
cleaning results.
Additional settings
Select the

Additional functions
Select

pressing the OK button.
In the menu that then appears, you can choose from the following
options:
– Reset
Reset all of the parameters changed under the "Additional func-
tions" menu to their default settings.
Increased water level
–
Increase the amount of water used in all wash programs.
– Interim rinse
Include an interim rinse in all programs that support this feature
(see "Program chart").
– Dispensing system
Vent the dispensing systems and change the name of the DOS
modules.
Temperature / Time
–
Change the temperature and holding time for the main wash and fi-
nal rinse stages of a wash program.
Reset
Select the option and confirm your choice with the OK but-

ton.
Reset
Yes
No
(
Yes
Select and confirm your selection with the OK button.

All parameters that have been changed under "Additional func-
tions" will be reset to the factory default setting.
Additional settings
menu.
and open the corresponding menu by
81