Setting The Water Hardness Level - Miele PG 8504 Operating Instructions Manual

Water softener
30

Setting the water hardness level

Water hardness can be set between 0 and 70 gr/gal (0 - 70 °dH).
Additional settings
Open the

the  button and then switch it on again with the  button while
keeping the  button pressed.
Open the menu as follows:

 Additional settings
Water hardness

The bottom line of the display shows the possible input range.
Water hardness input values can be found in the chart on the next
page.
Where the water hardness fluctuates, e.g. between 8 - 18 gr/gal (8 -
18 °dH), always program the machine to the higher value, 18 gr/gal
(18 °dH) in this example.
Set the water hardness level using the arrow buttons ( = higher

and  = lower).
Press OK to save the setting.

menu by switching the machine off with
Water hardness
19
°dH
(0 - 70 °dH )