Leds On The Keypad - Miele PG 8061 Operating Instructions Manual

LEDs on the keypad

Light-emitting diodes that indicate the status of the dishwasher are
integrated in the keypad.
Except for the Start/Stop button, which has a green LED during nor-
mal operation, all other LEDs light up yellow.
In the event of a fault the Start/Stop button flashes red.
Button LED
 (On/Off)
ON
button
OFF
,  ON
and 
buttons
(program
shortcut
OFF
buttons)
 button
ON
(additional
programs)
OFF
Start/Stop ON
button
FLASHES
GREEN
FLASHES
RED
OFF
 button
ON
(door but-
ton)
FLASHES
OFF
Status
The dishwasher is on.
The dishwasher is off.
The lit program has been selected. At
the end of the program, the LED will re-
main lit until a different program is se-
lected.
The program is not selected, or program
settings are being configured.
A program was selected from the pro-
gram list. At the end of the program, the
LED will remain lit until a different pro-
gram is selected.
No program has been selected from the
list, or program settings are being con-
figured.
A program is running.
A program has been selected, but has
not yet started.
A fault has occurred.
A program has finished.
A program has been selected, but has
not yet started.
A program has finished and the door is
closed.
A program is running.
Operation
49