Setting The Water Hardness Level - Miele PG 8059 Operating Instructions Manual

Filling the salt reservoir
28

Setting the water hardness level

The water softener can be set between 0 - 12.6 mmol/l (0 - 70 °dH).
Further settings
Select the

Water hardness
Select

Water hardness
°dH
19
(0 - 70 °dH)
The factory default for the water softener is set to a hardness of
3.4° mmol/l (19°dH).
When adjusting the setting, please consult the following table.
Where the water hardness fluctuates, e.g. between 1.4 - 3.1 mmol/l (8
- 17 °dH), always programme the dishwasher to the higher value, 3.1
mmol/l (17 °dH) in this example.
Use the  (higher) and  (lower) arrow buttons to set the water

hardness required and confirm your entry using the OK button.
menu.
and confirm your choice with the OK button.