Korenix JetNet 3810G Series User Manual
Industrial power over ethernet gbe switch
Hide thumbs
Also See for JetNet 3810G Series:
- User manual (21 pages) ,
- User manual (21 pages) ,
- Installation manual
Related Manuals for Korenix JetNet 3810G Series
Summary of Contents for Korenix JetNet 3810G Series
- Page 1 Korenix JetNet 3810G Series JetNet 3810(Gf)/ 3806G/ 3710G Industrial Power over Ethernet GbE Switch User’s Manual Version: 1.0 Date: 10-July, 2015 www.korenix.com...
- Page 2 JetNet 3810(Gf)/ 3806G/ 3710G Industrial Power over Ethernet GbE Switch User’s Manual Copyright Notice Copyright © 2015 Korenix Technology Co., Ltd. All rights reserved. Reproduction in any form or by any means without permission is prohibited. Korenix JetNet 3810(Gf)/ 3806G/ 3710G...
-
Page 3: Table Of Contents
2.7 Wiring the Fiber Ports (only JetNet 3810Gf) ..........16 2.8 Connecting Powered Device (PD) ..............17 2.9 DIN-Rail Mounting Installation............... 18 3. Appendix ........................19 3.1 Product Specification ..................19 3.2 Revision History ....................21 Korenix JetNet 3810(Gf)/ 3806G/ 3710G... -
Page 4: Introduction
1. Introduction Korenix JetNet 3810G Series is a power over Ethernet rail switch that is specially designed for industrial or commercial applications. The following topics are covered in this chapter: 1.1 Overview 1.2 Product Features Korenix JetNet 3810(Gf)/ 3806G/ 3710G... -
Page 5: Overview
SFP fiber transceiver interfaces which can meet different specifications of fiber cable for extending transmission distance. To ensure the high quality of video data transmission, JetNet 3810G series not only provide Gigabit bandwidth uplink for large image traffic, but also support QoS to adjust the priority of data transfer. -
Page 6: Product Features
1.2 Product Features Korenix JetNet 3810(Gf)/ 3806G/ 3710G have the following features: JetNet JetNet JetNet JetNet JetNet 3810G 3810Gf 3810f 3806G 3710G Features Highlight 10/100 TX PoE port 10/100/1000 TX uplink port Giga FX SFP 100 FX SFP PoE Standard compliant: IEEE802.3af PoE... -
Page 7: Hardware Installation
2. Hardware Installation 2.1 Hardware Introduction Dimensions JetNet 3810(Gf) dimensions: 149.0(H) x 131.2(W) x 66.0(D) (with Din-rail clip) Korenix JetNet 3810(Gf)/ 3806G/ 3710G... - Page 8 JetNet 3806G dimensions: 149.0(H) x 131.2(W) x 66.0(D) (with Din-rail clip) JetNet 3710G dimensions: 149.0(H) x 131.2(W) x 66.0(D) (with Din-rail clip) Korenix JetNet 3810(Gf)/ 3806G/ 3710G...
-
Page 9: Front Panel
JetNet 3806G includes system power LED x1, alarm relay LED x1, PoE LED x4, and 12 LEDs for the port operating status. JetNet 3810G/ 3710G JetNet 3806G Power LED Alarm Relay LED PoE Indicators LED for RJ-45 port RJ-45 ports for 10/100Mbps RJ-45 ports for 10/100/1000M Korenix JetNet 3810(Gf)/ 3806G/ 3710G... - Page 10 JetNet 3810Gf/ 3810f includes system power LED x1, alarm relay LED x1, PoE LED x8, 16 LEDs for RJ-45 port operating status, and 4 LEDs for SFP fiber port status. Power LED Alarm Relay LED PoE Indicators LED for RJ-45 port LED for fiber speed LED for fiber LNK/ACT Korenix JetNet 3810(Gf)/ 3806G/ 3710G...
-
Page 11: Bottom View
No failure is found PoE LED Status Description Green The port is delivering PoE power. PoE 1~8 No PD is attached. 10/100 TX Port LED Status Description LNK/ACT Green on RJ-45 port is attached with partner. Korenix JetNet 3810(Gf)/ 3806G/ 3710G... - Page 12 3 blinks per order – 1000Mbps* Yellow Blinking 2 blinks per order – 100Mbps** Speed Fiber port’s link is inactive *NOT supported in JetNet 3810f ** 100M fiber is optional and can be supported by different settings Korenix JetNet 3810(Gf)/ 3806G/ 3710G...
-
Page 13: Wiring The Power Inputs
Note: The product intended to be supplied by LPS power supply. Insert the positive and negative wires of your DC supply into the V+ and V- contacts of the terminal block connector. The acceptable wire range is 12 to 24 AWG. JetNet 3810(Gf)/ 3806G Korenix JetNet 3810(Gf)/ 3806G/ 3710G... -
Page 14: Wiring The Relay Output
JetNet 3810(Gf)/3806G/3710G provide Relay Output. The relay contacts are energized (open) for normal operation and will close under faulty condition such as Ethernet port link break. The Relay alarm can be configured by DIP Switches. Korenix JetNet 3810(Gf)/ 3806G/ 3710G... -
Page 15: Wiring Earth Ground
3. Tighten the screw after the earth ground wire is connected. 2.5 DIP Switches 10-Pin Dip switches are located on the bottom panel of JetNet 3810(Gf)/ 3710G for configuration purpose (6-Pin for JetNet 3806G). They are used to configure Port Alarm to corresponding TX ports. Korenix JetNet 3810(Gf)/ 3806G/ 3710G... -
Page 16: Wiring The Ethernet Ports
For JetNet 3810G/ 3806G/ 3710G model, the switch also provides two 10/100/1000 Base-TX uplinks. Port 1 to port 8/4 also provides Power over Ethernet function that delivers DC 48V power through the spare pairs to power the PD. Korenix JetNet 3810(Gf)/ 3806G/ 3710G... -
Page 17: Wiring The Fiber Ports (Only Jetnet 3810Gf)
JetNet 3810Gf equips 2 gigabit SFP fiber ports. The speed of the SFP port supports up to 1000Base-SX/LX. The SFP ports accept standard MINI GBIC SFP transceiver. But, to ensure system reliability, Korenix recommends using the Korenix certificated Gigabit SFP Transceiver. The certificated SFP transceiver includes 1000Base-SX/LX single/multi mode ranger from 550m to 80KM. -
Page 18: Connecting Powered Device (Pd)
If the RJ-45 is bound with the wrong pin number, JetNet will not recognize the PD and won’t forward DC 48V power to PD, since the JetNet 3810G series switch following the Alternative B mode. In the IEEE 802.3af standard documents, it indicates the PD should support mode A and B, and only receiver power from either mode A or mode B. -
Page 19: Din-Rail Mounting Installation
EN 55022 DIN Rail for your reference. The DIN rail should behind the spring when install the JetNet 3810G series onto the standard DIN Rail. Follow the steps below to mount the JetNet 3810G series on the DIN-Rail track. -
Page 20: Appendix
Check if the DIN-Rail clip is tightly attached to the track. To remove the JetNet 3810G series from the track, reverse the steps above. 3. Appendix 3.1 Product Specification 3.2 Revision History 3.1 Product Specification Technologies Standard IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-T Fast Ethernet... - Page 21 Isolated 3.3V system power Power Consumption* JetNet 3810(Gf): 11W@DC 24V without PD loading 9.8W@DC 12V without PD loading JetNet 3806G: 8.3W@DC 24V without PD loading 7.2W@DC 12V without PD loading JetNet 3710G: 7W@DC 48V without PD loading Korenix JetNet 3810(Gf)/ 3806G/ 3710G...
-
Page 22: Revision History
V0.3 02/11/2011 Add port alarm note 1. Add JetNet 3810f V0.6 03/05/2012 2. Modifying DIP switches 1. Update Power Consumption in spec. V1.0 07/10/2015 2. Add the Power budget and PoE output voltage in spec. Korenix JetNet 3810(Gf)/ 3806G/ 3710G... - Page 23 3. Transfer to official version V1.0 Korenix JetNet 3810(Gf)/ 3806G/ 3710G...