Wiring The Power Inputs - Korenix JetNet 3810G Series User Manual

2.2 Wiring the Power Inputs

JetNet 3810(Gf)/3806G accepts 12~24V DC power input and boosts to 48V DC output
for 802.3af standard PoE devices.
JetNet 3710G without power boosting function accepts only 48V DC power Input.
IMPORTANT: Do make sure that different models must connect to the corresponding
supply voltage. Guarantee will not apply to the damage caused by wrong input power.
Note: The product intended to be supplied by LPS power supply.
1. Insert the positive and negative wires of your DC supply into the V+ and V-
contacts of the terminal block connector. The acceptable wire range is 12 to 24 AWG.
JetNet 3810(Gf)/ 3806G
Korenix 12
JetNet 3810(Gf)/ 3806G/ 3710G