Wiring The Ethernet Ports - Korenix JetNet 3810G Series User Manual

DIP Switch number
DIP 1~2
JetNet 3810(Gf)/3710G/
3806G
JetNet 3810(Gf)/3710G:
DIP 3~10
JetNet 3806G:
DIP 3~6
Note: Port break alarm is limited to apply on Auto-negotiation 10/100 Full-duplex
device
DIP Switch number mapping to corresponding PoE port & GbE port as follow:
DIP Switch # 3
PoE port 1
For JetNet 3810G / 3710G / 3806G:
DIP Switch # 1
GbE port 2
For JetNet 3810Gf / 3810f:
DIP Switch # 1
GbE port 1

2.6 Wiring the Ethernet Ports

JetNet 3810(Gf)/ 3806G/ 3710G Industrial Gigabit PoE Switch support 8/4 RJ-45 ports
with automatic MDI/MDI-X crossover, PoE Injector, and automatic 10/100Mbps data
rate sensing for 10Base-T or 100Base-TX connections. Automatic MDI/MDI-X
crossover allows you to connect to other switches, hubs, or workstations, without
regard to using straight-through or crossover cabling. For JetNet 3810G/ 3806G/
3710G model, the switch also provides two 10/100/1000 Base-TX uplinks.
Port 1 to port 8/4 also provides Power over Ethernet function that delivers DC 48V
power through the spare pairs to power the PD.
Status Description
On
To enable GbE port break alarm at this port
To disable GbE port break alarm at this port
Off
(Default)
On
To enable PoE port break alarm at this port
To disable PoE port break alarm at this port
Off
(Default)
4 5 6
2 3 4
2
1
2
2
Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
7 8 9
5 6 7
10
8
15