Korenix JetNet 3810G / 3806G/ 3710G Quick Installation Guide

Overview

Package Check List

• JetNet device
• Attached 4-pin power terminal block
• Quick installation guide

Installation

DIN rail Mount Grounding JetNet

The aluminum DIN rail attachment on the back of JetNet Device is used to snap into the DIN rail plate

Grounding JetNet

Connecting grounding screw to the earth ground will ensure safety and reduce the interference of noise.

Wiring the Relay Output

The relay output contacts are in the Left of the terminal block connector. By inserting the wires and settings the DIP switch of the respective alarm function to "ON", relay output alarm will detect port or power fault, and form a short circuit.

Dip Switch Setting

DIP Switches to configure Port Link Fail Alarm for GbE & PoE port

Note: The Pin No. of JetNet 3806G only DIP1~6

Default: off

JetNet 3810G

LED per unit

• Power On/off x1 (Green on/off)
• Alarm enable/ disable x1 (Red on/off)
• PoE LED x8 (Green on/off)

LED per port

• Link/Activity x10 (Green on/ blinking)
• 10/100-TX Full Duplex/ Collision x8 (Yellow on/ blinking)
• 10/100/1000-TX Speed x2 (Yellow blinking)

ME outline

1. Connect the power line from the power supply
2. Indicators: Power on (green on)

• Dimension (mm): 149(H) x 131(D) x 66(W)
• Weight: 1.05kg
• Operating temperature: -25~60 O C

PIN assignment—Power connector

• Power supply: Single input 12~24V DC, boosting to 48V DC for PoE
• Power consumption: 95W (incl. PoE), 30W

Note: For detail Power information, Please refer to User's Manual

Please refer to User's Manual

JetNet 3806G

LED per unit

• Power On/o x1 (Green on/o )
• Alarm enable/ disable x1 (Red on/o )
• PoE LED x4 (Green on/o )

LED per port

• Link/Activity x10 (Green on/ blinking)
• 10/100-TX Full Duplex/ Collision x4 (Yellow on/ blinking)
• 10/100/1000-TX Speed x2 (Yellow blinking)

ME outline

1. Connect the power line from the power supply
2. Indicators: Power on (green on)

• Dimension (mm): 149(H) x 131(D) x 66(W)
• Weight: 1.05kg
• Operating temperature: -25~60 O C

PIN assignment—Power connector

• Power supply: Single input 12~24V DC, boosting to 48V DC for PoE
• Power consumption: 80W (incl. PoE), 25W

Note: For detail Power information,

Please refer to User's Manual

JetNet 3710G

LED per unit

• Power On/off x1 (Green on/off)
• Alarm enable/ disable x1 (Red on/off)
• PoE LED x8 (Green on/off)

LED per port

• Link/Activity x10 (Green on/ blinking)
• 10/100-TX Full Duplex/ Collision x8 (Yellow on/ blinking)
• 10/100/1000-TX Speed x2 (Yellow blinking)

ME outline

1. Connect the power line from the power supply
2. Indicators: Power on (green on)

• Dimension (mm): 149(H) x 131(D) x 66(W)
• Weight: 1.05kg
• Operating temperature: -25~70 O C

PIN assignment—Power connector

• Power supply: Single 48V DC for PoE
• Power consumption: 95W (incl. PoE), 30W

Note: For detail Power information,

Please refer to User's Manual

Support

5 Years Warranty

Each of Korenix's product line is designed, produced, and tested with high industrial standard. Korenix warrants that the Product(s) shall be free from defects in materials and workmanship for a period of five (5) years from the date of delivery provided that the Product was properly installed and used.

This warranty is voided if defects, malfunctions or failures of the warranted Product are caused by damage resulting from force measure (such as floods, fire, etc.), other external forces such as power disturbances, over spec power input, or incorrect cabling; or the warranted Product is misused, abused, or operated, altered and repaired in an unauthorized or improper way.

Attention
To avoid system damage caused by sparks, please DO NOT plug in power connector when power is on.

The product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronics equipment(RoHS Directives & RoHS 2.0)

Korenix Customer Service

KoreCARE is Korenix Technology's global service center, where our professional staffs are ready to solve your problems at any time Korenix global service center's e-mail is KoreCARE@korenix.com.
For more information and documents download please visit our website:
http://www.korenix.com/downloads.htm

Korenix Technology Co., Ltd. (A Beijer Electronics Group Company)

Tel: +886-2-89111000
Fax: +886-2-29123328
Business service: sales@korenix.com
Customer service: koreCARE@korenix.com
www.korenix.com
CPQ000N3810003

Patent No. (Taiwan):
Granted Invention: I 313547
Granted Invention: I 321415
Granted Invention: I 344766
Granted Invention: I 346480
Granted Invention: I 356616
Granted Invention: I 364684
Granted Invention: I 376118
Granted Invention: I 393317
Granted Invention: I 398066
Granted Invention: I 398125
Utility Model: M 339841
Utility Model: M 339840

Documents / Resources

References

• Korenix Technology, a Beijer Electronics company
• Korenix Technology, a Beijer Electronics company

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Korenix JetNet 3810G / 3806G/ 3710G Quick Installation Guide