Taurus Bapi 7.0 Inox Manual page 22

Instructions for use
Before use:
- Make sure that all the product's
packaging has been removed.
- Before using the product for the first
time, clean the parts that will come
into contact with food in the manner
described in the cleaning section.
Use:
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Work with the food you want to
process.
- Select the desired speed.
- Turn the appliance on using the on/
off switch.
Electronic speed control:
- The speed of the appliance can
be regulated by using the speed
regulator control (A). This function
is very useful, as it makes it possible
to adapt the power of the appliance
to the type of work that needs to be
done.
Once you have finished using the
appliance:
- Turn the appliance off, using the on/
off switch.
- Unplug the appliance to the mains.
- Clean the appliance
Accessories:
Stick blender accessory (Fig. 2)
- This accessory is used to make sau-
ces, soups, mayonnaise, milkshakes,
baby food, crushed ice, etc.
- Attach the stick blender to the mo-
tor body by turning it in the direction
indicated by the arrow (Fig. 2A).
- Pour the foodstuffs into the sieve
and operate it by pressing the start
button.
- Detach the stick blender by turning
it in the opposite direction to the
arrow and remove it for later cleaning.
Chopping accessory (Fig. 3):
- This accessory is used to chop
vegetables or meat...
- Put the food to be prepared in the
chopping container with the blades
inside and attach the cover firmly
(Fig. 3A).
- Fit the adapter fitting to the motor
unit by turning it in the direction of
the arrow (Fig. 3B).
- Attach the unit to the cover and
switch the appliance on (be careful:
do not switch the appliance on if the
whole unit is not properly fitted and
connected together (Fig. 3C).
- Stop the appliance when the food
reaches the desired texture.
- Detach the unit from the lid, and
release the adapter fitting (Fig. 3D)
Whisk accessory (Fig. 4):
- This accessory is used to whip
cream, beat egg whites...
- Insert the whisk into the reducer
assembly (Fig. 4A). Attach this as-
sembly to the motor body by turning
it in the direction indicated by the
arrow (Fig. 1B).
- Put the food into a large receptacle
and switch the appliance on. For best