VERTICAL CONTACT TOASTER
1. Press both keys at the same
time for 1 second to start
adjustment sequence.
2. Press TEMP UP key to raise
platen setpoint temperature.
3. Press TEMP DOWN key to
lower platen setpoint
temperature.
Figure 7. Adjusting Platen Heater
Temperature Setpoint
Hi-Limit Reset Button
A hi-limit thermostat will turn off electrical power to the
heater and control circuits if the unit overheats. To
reset this thermostat, allow sufficient time (10-15 min-
utes) for the unit to cool down, then locate the reset
button at the rear of the unit. Remove protective cap,
depress the reset button, and reinstall protective cap
(Figure 4).
NOTE: If the unit requires continuous resetting, contact
your authorized service agency.
OPERATION (continued)
551
°F
°C
TEMP
TEMP
TEMP
UP
DOWN
SCALE
POWER
1. Press both keys at the same
time for 1 second to start
adjustment sequence.
2. Press TEMP UP key to raise
auxiliary heaters setpoint
temperature.
3. Press TEMP DOWN key to
lower auxiliary heaters
setpoint temperature.
Figure 8. Adjusting Auxiliary Heaters
Temperature Setpoint
10
336
°F
°C
TEMP
TEMP
TEMP
UP
DOWN
SCALE
POWER
P/N 1010747 Rev. G 11/15