Table of Contents
Advertisement
PaRT 1 • English
to highlight the menu of choice and press Ok advance to the next screen. Use
Press
pq
highlight to the setting of choice. Values can be changed with
7.3.1 language
This menu allows you to set up your language preferences.
Language:
Use
tu
First Audio:
Use
tu
Use
Second Audio:
tu
Audio isn't available.
Subtitle Language:
Use
tu
Second Subtitle Language:
Use
tu
Use
Teletext:
tu
Subtitle:
Use
tu
Normal, Hard of Hearing or Off*
* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then
most likely subtitles can be activated via Teletext if available.
7.3.2 Tv System
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution: Use this option to select the video resolution of your TV screen. Options are: By
Source (automatic detection of video resolution offered to the receiver), By Native TV
(automatic detection of maximal resolution of TV screen), and manual selections 480i,
576i up to 1080p Please use a setting that matches your TV's specifications. After a
selection is made, you will be asked to confirm. Selection above 576i is only applicable
on HDMI output.
Aspect Mode:
Use this option to select the aspect ratio of your TV and the preferred conversion
method. The options are: Auto (automatic detection of aspect ratio), 4:3 Panscan
(Displays 16:9 widescreen broadcasts full screen on your 4:3 TV), 4:3 letterbox (black
bars on top and under the picture on a 4:3 TV) and 16:9 (use this setting for 16:9 TV
sets).
Connection:
Use this option to select the connection to your TV set. Select HDMI or TV SCART. If
connection type HDMI is selected, then only the CVBS signal is available on the TV
SCART.
Digital Audio Output:
Toggles between PCM and Bitstream output. When PCM is selected, all digital audio
will be converted to (analogue) stereo audio. Bitstream enables you to listen or
transfer Dolby® Digital/Dolby® Digital Plus* audio to the TV via HDMI or to a Home
entertainment system (for example) through coaxial S / PDIF.
*Dolby® and the double-D symbol are registered trademarks of Dolby® Laboratories
7.3.3 local Time Setting
Here you can set up your region and time zone.
Region:
Use
tu
Set to By Region for broadcaster defined time, User Define to select manual a GMT zone
GMT Usage:
or to Off to input time and date manually.
GMT Offset:
Allows you to adjust the time zone you live in. This option is only available when GMT
Usage is set to User Define.The GMT Offset range is "-11:30 ~ +12:00", increasing by half
hours progressively. The cities matching the set GMT Offset are displayed at the bottom
of the screen.
Daylight Saving: Select Off or On to add one hour extra for summer time during the summer.
to select the language for the On Screen Display.
to select Audio language.
to select a language that will be played when the language selected at First
to select the preferred subtitle language.
to select the preferred subtitle language.
to select the preferred Teletext language (when available).
to select the preferred subtitle type to be displayed automatically. Select
to select the region you live in.
. Press EXIT to leave.
tu
to move the
pq
11
Advertisement
Table of Contents
