Step 1. Remove The Shipping Materials - Pitney Bowes DM100i Quick Install Manual

For best results, we strongly encourage you to follow the steps in this
!
guide in sequential order.

Step 1. Remove the shipping materials.

If you're replacing another Pitney Bowes meter with
!
this one, you'll need to first remove the postage
funds from your old meter. Refer to the
"return" or "transfer" documents provided.
Open the top cover of the meter and remove any
packing material, protective foam, or tape that may
be present. Close the cover.
Step 2. Connect.
You'll need to connect to the Pitney Bowes
Data Center to add postage funds, download
software updates, and perform USPS required
inspections.
Use the included LAN Adapter (only available with DM125/DM225
models) to connect to your network. Follow Step 3. Connect via
LAN setup.
If a direct LAN connection is not available (DM100i/DM200L and/
or DM125/DM225 clients without LAN capability), please install the
PC Meter Connect™ Desktop application, available online at www.
pitneybowes.com/support/pcmc. After you've installed the PC Meter
Connect Desktop Application, follow the onscreen instructions, which
will guide you through the rest of the system setup process. You won't
need to refer to this Quick Install Guide again.
DMXXX
Product Description
PXXX XXXXXXX
Product Code (PCN) Serial Number
Request Service Support, Order Supplies or
Check Postage Account Balance On-Line
www.pb.com
or call
Select "My Account" 1-800-522-0020
1