Other Messages - Canon ImagePrograf iPF840 series Basic Manual

GARO Wxxxx (x represents a number)

Other Messages

Other Messages
GARO Wxxxx (x represents a number) .......................................................................................................... 144
ERROR Exxx-xxxx (x represents a letter or number) ...................................................................................... 144
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) .................................................................... 144
Top cover is open. ......................................................................................................................................... 144
Prepare for parts replacement. ...................................................................................................................... 145
Parts replacement time has passed. ............................................................................................................. 145
Unknown file. ................................................................................................................................................ 145
Multi-sensor error .......................................................................................................................................... 145
No Roll Unit. .................................................................................................................................................. 130
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Fastening tape or the Belt Stopper has not been removed inside the
Top Cover.
An error requiring service may have occurred.
Top cover is open.
Top cover is open.
144
The printer has detected that the Top Cover is
open.
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Cause
Write down the error code and message, turn off the printer, and contact your Can-
on dealer for assistance.
Cause
Cause
Corrective Action
Turn off the printer and remove the roll from the printer be-
fore restoring power.
Turn off the printer, open the Top Cover and remove the
tape or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds before
restoring the power.
If the message is displayed again, write down the error code
and message, turn off the printer, and contact your Canon
dealer for assistance.
Open the Top Cover fully, remove any foreign objects, and close the Top Cover
again.
Corrective Action
Corrective Action
Corrective Action
iPF840 Series
Basic Guide