Printing Does Not Start - Canon ImagePrograf iPF840 series Basic Manual

iPF840 Series

Printing does not start

Printing does not start
The Data lamp on the Control Panel does not light up ................................................................................... 107
The printer does not respond even if print jobs are sent ................................................................................ 107
Ink Filling.. is displayed .................................................................................................................................. 107
The display screen indicates Agitating ........................................................................................................... 108
The Data lamp on the Control Panel does not light up
The Data lamp on the Control Panel does not light up
Cause
The printer is not Make sure the power cord is securely plugged in, all the way. Press the Power button to turn on the printer.
on.
The target printer •
was not selected
when printing.
•
The print job is •
paused.
1.
2.
3.
1.
2.
•
1.
2.
3.
4.
The printer does not respond even if print jobs are sent
The printer does not respond even if print jobs are sent
Cause
In the Control Panel menu, Pause Print is On.
In the Control Panel menu, Use USB or Use
Ethernet is set to Off.
You have selected Save in mail box in Output
Method on the printer.
Print jobs are pending.
Ink Filling.. is displayed
Ink Filling.. is displayed
Cause
The printer was forced off during operation.
Basic Guide
In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try printing
again.
In Mac OS, open the dialog box of the printer driver, select the printer from the list of Printer, and try print-
ing again.
In Windows, restart the print job as follows.
Click the printer icon in the Devices and Printers window.
Click See what's printing to open a window.
Click Pause Printing in the Printer menu to clear the check box.
Note, depending on the version, restart the print job as follows.
Right-click the printer icon in the Printers and Faxes (or Printers) window.
Click Resume Printing in the menu.
In Mac OS, restart the print job as follows.
Click Print & Scan. (This is identified as Printers & Scanners or Print & Fax in other versions of Mac
OS.)
Choose the printer.
Click Open Print Queue to open a window.
Click Resume Printer (or Resume).
Set Pause Print to Off.
(See "Pausing Printing.")
Set Use USB or Use Ethernet to On.
(See "Menu Settings.")
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.")
Manage the jobs on hold and print as needed.
(See "Managing Pending Jobs (Printing or Deleting Jobs on
Hold).")
Wait until the system has been filled with ink.
The Data lamp on the Control Panel does not light up
Corrective Action
Corrective Action
User's Guide
➔
User's Guide
➔
User's Guide
➔
User's Guide
➔
Corrective Action
107