Menu Structure; Paper Menu - Canon ImagePrograf iPF840 series Basic Manual

Menu Structure

Menu Structure
Menu Structure
The menu structure is shown categorized by tab. The * on the right side of an item indicates the default value.
The printer menu is classified into regular menu items available when no print job is in progress and menu during
printing items only available while printing is in progress. see "Printer Menu Operations."
Regular menu

Paper Menu

Ink Menu
Job Menu
Set./Adj. Menu
*1:Only displayed in the menu during printing. Not displayed in the regular menu.
For instructions on menu operations, see "Menu Operations."
For details on menu items, see "Menu Settings."
Menus may change according to the optional products in use.
Paper Menu
The Paper Menu is not displayed during printing.
First Level
Load Paper
Eject Paper
Chg. Paper Type( *1 )
Chg. Paper Size
ManageRemainRoll
Paper Details
60
Not displayed
The same
The same
A limited
played.
•
Adj. Fine Feed( *1 )
•
Printer Info
User's Guide
➔
Second Level
Roll 1 (Upper) | Roll 2 (Lower) | Cut Sheet
Roll 1 (Upper) | Roll 2 (Lower) | Cut Sheet
Roll 1 (Upper) (The paper type is displayed here.) ( *1 )
Roll 2 (Lower) (The paper type is displayed here.) ( *1 )
Cut Sheet (The paper type is displayed here.) ( *1 )
Sheet Size( *4 ) (The size of paper is displayed here.) ( *2 )
CustomPaperSize
Roll1(Uppr)Lngth( *3 ) (Set the length)
Roll2(Lwr) Lngth( *3 ) (Set the length)
Roll 1 Wdth(Upr)( *4 ) (Set the width)
Roll 2 Wdth(Lwr)( *4 ) (Set the width)
Off* | On
(The paper type is Head Height
displayed here.) ( *1 )
Skew Check Lv.
Cutting Mode( *6 )
Cut Speed
Trim Edge First
CutDustReduct.
VacuumStrngth
Scan Wait Time
Menu during printing
Ink Menu as normal is displayed.
Job Menu as normal is displayed.
Set./Adj. Menu containing the following items is dis-
P.56
➔
Third Level Fourth Level
(Set the length and width)
Automatic* | Highest | High | Standard | Low |
Lowest
Standard* | Loose | Off
Automatic | Eject | Manual
Fast | Standard | Slow
Automatic | Off | On (Preset Len) | On(Input
Length) | Manual
Off | On
Automatic* | Strongest | Strong | Standard |
Weak | Weakest
Dry time
Area( *5 )
iPF840 Series
User's Guide
➔
Fifth Level
Off* | 1 sec. | 3 sec. |
5 sec. | 7 sec. | 9
sec.
Entire area* | Lead-
ing edge
Basic Guide