Paper Is Not Cut Neatly; Paper Is Not Cut; The Size Of Clear Film Cannot Be Detected - Canon ImagePrograf iPF840 series Basic Manual

Paper is not cut neatly

Paper is not cut neatly
Paper is not cut neatly
The paper is bent or curled at the cut posi-
tion.
Paper rises by the ends of the cut position
before it is cut.
You are using paper that cannot be cut with
the Cutter Unit.
Cut Speed is not configured correctly in the
Control Panel menu.
During cutting, printed documents fall out at
an angle.

Paper is not cut

Paper is not cut
In the printer driver, No or Print Cut Guideline is specified
in Automatic Cutting.
In the Control Panel menu, Cutting Mode is set to Eject
or Manual.

The size of clear film cannot be detected

The size of clear film cannot be detected
The Platen is soiled with ink or other substances.
106
Cause
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.")
Change the Cut Speed setting in the Control Panel menu.
(See "Menu Structure.")
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after print-
ing, as they are cut.
(See "Specifying the Cutting Method for Rolls.")
Cause
Cause
P.60
➔
Specify Yes in Automatic Cutting in the printer driver.
(See "Page Setup Sheet (Windows).")
(See "Paper Detailed Settings Dialog Box (Mac OS).")
If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
(See "Specifying the Cutting Method for Rolls.")
Corrective Action
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
Corrective Action
User's Guide
➔
User's Guide
➔
Corrective Action
User's Guide
➔
➔
P.51
➔
iPF840 Series
User's Guide
➔
User's Guide
Basic Guide