Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets - Canon ImagePrograf iPF840 series Basic Manual

iPF840 Series
8
Lower the Release Lever and close the Top Cover.
9
In a crouching position, push the Roll Unit in.
10
Position the Wheeled Output Stacker by the printer. (See "Using the Wheeled Output Stack-
er.")
User's Guide
➔
11
Turn the printer on. (See "Turning the Printer On and Off.")

Roll paper cannot be inserted into the Paper Feed Slot

Roll paper cannot be inserted into the Paper Feed Slot
Cause
The roll paper is warped.
Paper is jammed by the paper feed slot.
The paper source selection is incorrect.
If paper cannot be advanced from Roll 2 (Lower),
the Roll Unit Cable is disconnected.

Cannot load sheets

Cannot load sheets
Cause
The paper source selection is incorrect.
Basic Guide
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
Press the Load button and select the paper source.
Connect the Roll Unit Cable firmly to the Roll Unit Power Supply Inlet and the
inlet on the roll unit.
Corrective Action
Press the Load button and select the paper source.
Roll paper cannot be inserted into the Paper Feed Slot
User's Guide
➔
Corrective Action
P.97
➔
P.100
➔
105