Electric Gear Shift Button; Start/Stop Button - BOMBARDIER TRAXTER 7415 Operator's Manual

CAUTION: Always completely stop
the vehicle and apply the brake prior
to moving the transmission lever.
P: Parking
This position locks the transmission to
help prevent vehicle movement. Al-
ways use when the vehicle is not in
operation. In some circumstances, it
may be necessary to rock the vehicle
back and forth to move the gears in the
transmission to allow the park to be
set.
R: Reverse
This allows the vehicle to go backward.
The vehicle speed is limited.
WARNING
Before moving vehicle in reverse,
ensure the path behind is clear of
obstacles or bystanders. Remain
seated.
N: Neutral
This position disengages the transmis-
sion to allow manual vehicle move-
ment or towing.
H: High gear
This selects the transmission in a high-
gear range. It is the normal riding posi-
tion. It allows the vehicle to reach its
maximum speed.
L: Low gear
This selects the transmission in a low-
gear range. It is the working position.
It allows the vehicle to move slowly
with the maximum traction and power.
Refer to Electric Gear Shift Button
below for gear shifting.
The gear position is displayed with in-
dicator lights. Refer to Electric Gear
Shift Button below.
6) Electric Gear Shift
Button
Located on left side of handlebar. When
pressing on the upper face, it shifts the
transmission to the next higher gear.
When pressing on the lower face, it
shifts the transmission to the next low-
er gear.
1
V01I07Y
1. Gear shift button
2. Press here to upshift
3. Press here to downshift
The lower the gear, the slower the ve-
hicle speed and the higher the gear,
the higher the vehicle speed.
Engine must be running to allow gear
change.
The button must be released then
pressed again to perform another gear
shift.
There are 5 gears in each reverse, high
and low gear positions.

7) Start/Stop Button

Located on left side of handlebar. Dual
function switch.
To start engine, press and hold the but-
ton. Release immediately after engine
is started.
To stop engine, fully release throttle le-
ver then press the button. It is not nec-
essary to hold the button.
2
3
45