Advertisement
STEP 5
Assembly the Lat Tower Base (47) to
the Rear Cross Tube (45) fixed with the
Connecting Plate (53), Bolt (56) and the
Flat Washer (38). Attach the Lat
Connecting (49) to the Lat Tower Base
(47) fixed with the Bolt (31), the Flat
Washer (39) and Locknut (35). Solid the
Glide
Carriage
(48)
to
the
Lat
Connecting
(49),
the
Lat
Tower
(Upper)(50) to the Lat Connecting (49)
fixed with the Bolt (31) and the Flat
Washer (39). Assembly the Lat Cable
(63) to the Pulley (62), and put the roller
(62) onto the lat upper end (50) fixed
with the Bolt (56), the Flat Washer (38)
and the Locknut (35). Connect the Lat
Cable (63) with the Glide Carriage (48)
through the Carabineer (64). At last,
connect the Lat Tower Handle Bar (51)
with the Lat Cable (53) through the
Carabineer (64).
9
Advertisement
